 |
INSTALLING UNIVERSAL ASV CLUTCH LEVERS INTO A WORKS CONNECTION PERCH |
|||
| ASV Universal Clutch levers (Part#’s CLM01, CBM05, CLF10, CBF15) are all compatible with Works Connection Pro Perches. | |||
ASV Universal clutch levers can install into a works connection or most other after-market pro-style perches with no modification. |
|||
If you would like to use the bearings that came with your stock works connection lever and install them into your ASV lever follow the instructions below. |
|||
We have engineered our clutch levers to feature a steel pivot that is the exact size of the bearings on a Works Connection Pro Perch/Lever. | |||
You can replace the bushing in the ASV clutch lever with the bearings that were supplied with your stock Works Connection lever for improved performance. | |||
Step 1: take your stock lever from your Works Connection perch and CAREFULLY press out the two small bearings at the pivot hole. We suggest using a medium size punch or a large Phillips screwdriver. Push the bearings out with pressure, DO NOT POUND ON THE BEARINGS WITH A HAMMER. The bearings are very small and fragile and can break easily. (See Photos 1-3) |
|||
| |||
Step 2: take your ASV lever and with the same punch or Phillips screwdriver, press the steel bushing out of the ASV lever. If you need to use force or a hammer to pound the bushing out, that is O.K. (See photos 4-6) | |||
| |||
Step 3: gently press the two small bearings into your ASV lever. If the bearings are loose or do not stay in the hole, you can use some loc-tite bolt glue to secure the bearings. Be sure to use a very small amount of loc-tite and do not get any loc-tite in the bearings or they will not operate properly. (See photos 7-8) You are now ready to bolt your ASV lever into a Works Connection pro-perch. | |||
| |||
|
PRICING & APPLICATIONS UNBREAKABLE LEVERS Y-HANDLE ROTATOR CLAMP KICK STAND SOLO SAG SCALE APPAREL RACER SUPPORT TECH SUPPORT WARRANTY DEALERS INTERNATIONAL CHRIS & RYAN MEMORIAL
|
